Metal shell
Can add central card points
Plastic sliding handle
Industrial applications: audio control, industrial control, consumer electronics.
| Total Resistance | 1KΩ~1MΩ |
| Total Resistance Tolerance | 500Ω＜R＜1MΩ:± 20% R＜500Ω or R＞1MΩ: ±30% |
| Resistance Taper | A, B, C |
| Withstand Voltage | 1 minute at AC 300V |
| Insulated Resistance | ＞10MΩ at DC 250V |
| Sliding Noise | ＜100mV |
| Residual Resistance | 20mm: Term. 1~2(2′~3′):＜10Ω Term .2~3(1'~2'):＜ 20Ω 30mm: Term. 1~2 (2'~3'):＜10ΩTerm. 2~3(1'~2'):＜ 30Ω |
| Gang Error (Dual Unit) | - 40dB~0dB±3dB |
| Rated Voltage | Linear Taper B: 15mm:AC 100V 20mm,30mm,45mm,60mm:AC 200V Other Tapers: 15mm:AC 50V 20mm,30mm,45mm,60mm: AC 150V |
| Rated Power (Single Unit / Dual Unit) | Linear Taper B: 15mm: 0.05W/0.025W 20mm: 0.1W/0.05W 30mm: 0.2W/0.1W, 45mm: 0.25W/0.125W 60mm: 0.2W/0.2W Other Tapers: 15mm: 0.025W/0 .012W 20mm: 0.05W/0.025W 30mm: 0.1W/0.05W 45mm: 0.125W/0.06W 60mm: 0.1W/0.1W |
| Slide Torque | 10gf~100gf |
| Stopper Strength | 5.0Kgf.cm Min (from the base level to a point of 2 mm) |
| Detent Torque (only center click) | 50gf~200gf |
| Level Wobble | 2(2xL)/ 20mm Max. (L: Level length both sides) |
| Level Push-Pull Strength | 3.0Kgf Min at 10Sec. |
| Sliding Life | Standard Life: 15,000 Cycles Min Long Life: 100,000 Cycles Min. |
Verification succeeded
