Function: non-directional (omnidirectional) vibration signal detection
The contact form is similar to the normally closed switch, and the circuit will open and close quickly and instantaneously during vibration. OQBS0306 does not guarantee to be normally closed, and the switch occasionally stays in the circuit open state when it is stationary. When designing software, engineers should take signal conversion (change from high potential to low potential, and from low potential to high potential) as the opening and closing conditions, rather than the continuous opening or closing state as the opening and closing conditions.
Small size, save space
After half of the body is sunk into the PCB, it can be mounted on the board, and the required height for installation is very small
The shell is made of highly insulating plastic material, which can prevent the shell from conducting electricity and rusting
The surface of terminals and internal copper beads are plated with gold, which is not easy to oxidize
All plastic materials are made of high temperature resistant engineering plastics
The switch signal is simple and the circuit design is easy
Comply with RoHS standard and completely replace mercury switch
Economical solution than IC design
Made in Taiwan, fully inspected and delivered
Do not use solvent or similar items to clean the switch after the welding process is completed
Industrial applications: heater tipping detection power failure, automatic power failure safety device for electric iron, screen overturn detection, anti-theft alarm system, power-saving wake-up function, safe power failure of medical equipment.
| Contact Capacity | 10 mA，5VDC |
| Insulation Resistance | 1,000 MΩ min.，100 VDC |
| Dielectric Strength | 500 VDC min.，1 minute |
| Switch Capacitance | 5 pF max. |
| Backweld Furnace | Peak Temp.=255~260℃ |
| Storage Temperature | -40°C ~ 85°C |
| Humidity | 40°C / 95%RH |
| Mechanical Life | 2HZ,horizontal 1,000,000 cycles |
| Electrical Life | 100,000 cycles |
| Input Current | 1.0 mA |
| Operating Voltage | 5V |
Verification succeeded
