The potentiometer mold is surrounded by resin to avoid flux inflow
It can meet the needs of various products and be greatly customized
Micro design for audio product application
Industrial applications: audio control, industrial control, consumer electronics.
| Total Resistance | 1KΩ~1MΩ |
| Resistance Tolerance | 500Ω<R<1MΩ:±20% R≦500Ω or R≧1MΩ:±30% |
| Resistance Taper | A.B.C |
| Max. Operating Voltage | AC 50V, DC 10V |
| Rated Power | 0.05W |
| Rotational Noise | ＜100 mV |
| Insulation Resistance | ＜100MΩ at DC 250V |
| Withstand Voltage | 1 minute at AC 300V |
| Residual Resistance | ＜50Ω |
| Gang Error (Dual Unit or Multi-unit) | -40db~0db±3db |
| Detent | 1(Center) detent, 11 detents |
| Total Rotational Angle | 300°±10° |
| Push-Pull Strength | Pull: 10Kgf Push: 10Kgf Min at 10sec |
| Rotational Torque | 20-200gf.cm |
| Stopper Strength | 3.0Kgf.cm Min |
| Shaft Wobble | 0.5mm Max |
| Detent Torque | 20 ~ 250gf.cm |
| Bushing Nut Tighten Strength | 10.0Kgf.cm |
| Rotational Life | Standard life: ≥30,000 Cycles Long life: ≥100,000 Cycles |
| Cold Test | -20±2°C for 96 hours. △TR< ±15% |
| Dry Heat | 70±2°C for 96 hours. △TR< ±15% |
| Temperature Cycle | -20~+70°C, 5 cycles. △TR< ±15% |
| Soldering Condition | Solder dip: 260±5°C 5 Sec Manual Soldering: 350°C±10°C 3 Sec |
| Rated Power | 3.0A at DC 16V |
| Contact Resistance | ＜50mΩ |
| Switch Angle | 30°±10° |
| Switch Torque | 50~250gf.cm |
| Switch Life | 25,000 cycles at without load |
Verification succeeded
