The potentiometer mold is surrounded by resin to avoid flux inflow
Improved operating handle to enhance the strength of buckle into PCB
Tap or central clamping point can be added
Industrial applications: audio control, industrial control, consumer electronics.
| Total Resistance | 1KΩ~1MΩ |
| Full Resistance Tolerance | 500Ω<R<1MΩ : ± 20% : R<500Ω or R>1MΩ : ±30% |
| Linearity Of Resistance | A, B, W |
| Withstand Voltage | Hold at AC 250V for 1 minute |
| Insulation Impedance | ＞100MΩ at DC 250V |
| Sliding Noise | ＜100mV |
| Residual Resistance | Terminals.1~2：＜ 30Ω Terminals.2~3：＜ 50Ω |
| Synchronization Error (Double) | ± 2dB at 50% position of sliding stroke |
| Rated Voltage | AC 50V/DC 10V |
| Rated Power | 0.025W |
| Sliding Stroke | 20mm, 30mm |
| Sliding Moment | 10gf~100gf |
| Stop Strength | 3.0Kgf (increased from base to 2mm) |
| Segment Torque (Intermediate Dot Model Only) | 30~150gf |
| Slide Handle Push-Pull Strength | Hold above 3.0Kgf for 10 seconds. |
| Sliding Handle | Within 2 (2XL) /20mm (L: horizontal length of both sides) |
| Slip Life | ＞50，000 cycles |
Verification succeeded
